Building Mix

This is a proven quality mortar with a low carbon footprint for general brick and block laying.

How to Use


Bricks and blocks should be wet before you start the job. If too dry, the bricks will absorb the moisture from the mixture, weakening its strength in the process.


Mix in a wheelbarrow, on a plastic sheet or on a pre-wet surface using clean, drinkable water wherever possible.

  • Empty contents of cement bag and mix thoroughly with sand and stone
  • Gradually add water and mix to an even, paste consistency. Use a maximum of 7 to 8 litres of water. Too much water will result in a weaker mortar

Do not try to rework by mixing in additional water when semi-dry.


To take proper care of your project, prevent moisture by keeping it damp for 3 to 7 days. Gently spray with water and cover with plastic sheeting, hessian or damp sand.

Contact us

It's important to us that you, our customers, are able to contact us easily. For each of our product lines, our call centre staff are well-trained to process quotations, place orders and handle delivery queries.

National ordering/quotations: (011) 670 5555
0860 110 010 (sharecall)
(011) 670 5797
Error loading MacroEngine script (file: news-sidebar.cshtml)